Switching Operational Modes; From Normal To Secure Mode; From Secure To Normal Mode - Rosslare AC-F Series Installation And Programming Manual

Operation
4.3

Switching Operational Modes

The three modes of operation defined above can be changed
through a few steps.
4.3.1

From Normal to Secure Mode

The default factory setting for the normal/secure code is 3838.
To change from Normal to Secure mode:
1. Enter the 4-digit Normal/Secure code.
The left LED flashes red.
2. Press # to confirm the mode change.
The left LED stops flashing.
The auxiliary input of the controller can also be used to switch
the mode of operation from Secure to Normal and vice versa. If
the auxiliary input is selected it de-activates the Norma/Secure
mode code (see Section 5.9).
4.3.2

From Secure to Normal Mode

The default factory setting for the normal/secure code is 3838.
To change from Secure to Normal mode:
1. Enter the 4-digit Normal/Secure code.
The left LED flashes green.
26 AC-F/G4x Series Installation and Programming Manual
Red
Red
Green