AXIOMTEK IPC970 User Manual page 75

⚫ SATA and RST Configuration
You can read the currently installed hardware configurations from the SATA ports in the SATA
Configuration menu. During system boot up, BIOS will detect the present SATA devices
automatically.
➢
SATA Controller(s)
Enable or disable the SATA Controller feature. The default is Enabled.
➢
SATA Mode Selection
Determine how SATA controller(s) operate. Operation mode options are RAID and AHCI
(Advanced Host Controller Interface). The default is the AHCI mode.
➢
SATA Controller
Speed Indicates the maximum speed the SATA controller can support.
➢
Hot Plug
Designates this port as Hot Pluggable.
➢
Spin Up Device
If enabled for any of the ports, Staggerred Spin Up will be performed and only the drives that
have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
AMI BIOS Uitlity
IPC970 Series User's Manual
67