Lan Connector (Cn13) - AXIOMTEK IPC970 User Manual

1.7.10 LAN Connector (CN13)

The system has two RJ-45 connectors: LAN1 and LAN2. Ethernet connection can be established
by plugging one end of the Ethernet cable into this RJ-45 connector and the other end (phone
jack) to a 1000/100/10-Base-T hub.
1000
Pins
Base-T
L1 BI_DA+
L2 BI_DA-
L3 BI_DB+
L4 BI_DC+
L5 BI_DC-
L6 BI_DB-
L7 BI_DD+
L8 BI_DD-
Status LED
No Link
Link
Data activity
1G link speed LED
10Mb/s connection
100Mb/s connection
1Gb/s connection
2.5G link speed LED
10Mb/s or 100Mb/s
connection
1Gb/s connection
2.5Gb/s connection
Introduction
100/10
Base-
Descriptions
T
TX+ Bidirectional or transmit Data+
TX- Bidirectional or transmit Data-
RX+ Bidirectional or receive Data+
N.C. Bidirectional or not connected
N.C. Bidirectional or not connected
RX- Bidirectional or receive Data-
N.C. Bidirectional or not connected
N.C. Bidirectional or not connected
Status
OFF
Yellow
Yellow blinking
Status
OFF
Green
Orange
Status
OFF
Green
Orange
IPC970 Series User's Manual
23