Advertisement
Reissued: 09-Sep-08
Model:
Model G-P1
Version
1.10
Meter charge mode
1.09
Login
Machine stalls
WebImageMonitor
1.08.1
RC Gate firmware
update
1.07.2
One feature of a
customization added
RC Gate firmware
update
1.06.01
Communication Error
Firmware update
T
echnical
Title
Other changes (specification change):
PM alert messages will be displayed even in Meter Click
Mode (refer to RTB RG104012).
Important: To use the above new feature, you need to
install all of the following firmware together as a set.
System v1.10 or later (P/N #G1045243J)
Printer v1.10 or later (P/N #G1045239J)
Engine v1.12:01 or later (P/N #G1045130H)
If the device receives more than 300 login attempts
without cycling the power, the administrator will not be
able to login to the device via WIM. If user code
authentication is on, users will not be able to print.
After a large number of documents (more than 9K) are
printed in color, the device will stall.
Fixed: The menu for the Rom Update may not be
displayed in the WebImageMonitor.
The firmware cannot be updated if the administrator
password is blank.
The following feature from a customization was added as
standard:
Sp5-055-001 (Display IP Address):
Displays the IP address on the second line of the
operation panel when the printer is in the Ready
condition.
0: OFF (default)
1: ON
Important:
Websys firmware v1.07 (P/N G1045235C) or later must
be used with all of the firmware together.
NIB firmware v4.14.1 or later (P/N G1045234C)
Controller v1.07.2 or later (P/N G1045239F)
Printer v1.07.2 or later (P/N G1045243F)
Sometimes, the firmware cannot be updated via RC
Gate.
A communication error occurs between the mainframe
and RC Gate.
The user authentication data is cleared during a firmware
update. As a result, the new firmware cannot be installed
with RC Gate.
B
ulletin
Date:
24-Feb-05
Symptom Corrected
PAGE: 2/3
No.:
RG104002h
Advertisement
