Advertisement
Reissued: 09-Sep-08
Model:
Model G-P1
RTB Correction
The items in bold italics have been corrected or added.
Subject:
Controller firmware (printer system) release note for
G-P1
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
This RTB has been issued to announce the printer system firmware release information for
the Model G-P1 controller board.
Printer system
Version
1.12
1.11
1.10
1.09
1.05
1.07.2
1.06.1
1.05
1.04.1
1.03
1.02
Printer System
Version
1.12
Other changes
1.11
Bug fixed
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Program No.
G1045243L
G1045243K
G1045243J
G1045243H
G1045243D
G1045243F
G1045243E
G1045243D
G1045243C
G1045243B
G1045243A
Title
The firmware was modified to support the new
Fujitsu hard disk drive.
Sometimes, the counter data is not transferred to the RC
Gate Center.
SC670 or SC991 sometimes occurs when RC-GATE is
installed.
Communication between RC Gate and the device does
not work properly.
The device may stall if the Toner End condition occurs
while the paper is being fed from the bypass tray.
B
ulletin
Date:
Prepared by:
Part information
Electrical
Transmit/receive
Effective Date
September 2008 production
May 2006 production
November 2005 production
October 2005 production
April 2005 production
July 2005 production
June 2005 production
April 2005 production
March 2005 production
1st mass production
1st mass production
Symptom Corrected
No.:
24-Feb-05
K. Moriizumi
Action required
Service manual revision
Retrofit information
PAGE: 1/3
RG104002h
Advertisement
