Advertisement
Reissued: 26-Apr-06
Model:
Model G-P1
RTB Reissue
This is the correction of the version of the Websys.
Subject:
Controller firmware (Websys) release note for G-P1
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
This RTB has been issued to announce the printer firmware (Websys) release information
for the Model G-P1 controller board.
Websys
Version
1.01
1.04
1.07
1.08
Websys
Version
1.01
1.04
Simplified Chinese
1.07
Some features of a
customization added
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Program No.
G1045235A
G1045235B
G1045235C
G1045235D
Title
-
1st mass production
Wording corrections (simplified Chinese).
Important:
used with all of the firmware together.
NIB firmware v 4.14.1 or later (P/N G1045234C)
Controller v1.07.2 or later (P/N G1045239F)
Printer v1.07.2 or later (P/N G1045243F)
The following settings have been added to WIM
[Configuration->Device Settings->System]:
1. Display IP Address on the Display Panel - Displays
the device's IP address on the panel.
2. Permit ROM Update - Enable/Disable firmware
updates.
The device now supports the ROM update function via
WIM. [Configuration->ROM Update]
B
ulletin
Date:
Prepared by:
Part information
Electrical
Transmit/receive
Effective Date
1st mass production
March 2005 production
July 2005 production
May 2006 production
Symptom Corrected
Websys firmware v1.07 or later must be
No.:
29-Jun-05
K. Moriizumi
Action required
Service manual revision
Retrofit information
PAGE: 1/2
RG104006b
Advertisement
