Advertisement
Reissued: 2-May-06
Model:
Model G-P1
Version
1.10
Meter charge mode
1.11
Bug fixed
T
echnical
Title
Other changes (specification change):
PM alert messages will be displayed even in Meter
Click Mode (refer to RTB RG104012).
Important: To use the above new feature, you need
to install all of the following firmware together as a
set.
System v1.10 or later (P/N #G1045243J)
Printer v1.10 or later (P/N #G1045239J)
Engine v1.12:01 or later (P/N #G1045130H)
Sometimes, the counter data is not transferred
to the RC Gate Center.
SC670 or SC991 sometimes occurs when RC-
GATE is installed.
Communication between RC Gate and the device
does not work properly.
The device may stall if the Toner End condition
occurs while the paper is being fed from the
bypass tray.
B
ulletin
Date:
24-Feb-05
Symptom Corrected
PAGE: 3/3
No.:
RG104002g
Advertisement
