Advertisement
Reissued: 2-Nov-05
Model:
Model G-P1
Version
1.07.2
Some features of a
customization added
1.08.1
PCL
1.09
RPJL
T
echnical
Title
Some features of a customization were added as
standard:
The IP address is displayed on the LCD.
-
-
The IP address can be displayed on the LCD when
an error message occurs (Hold down the "Menu" key
for more than 5 seconds).
NOTE: To use these two features, you must set Sp5-055-
001 (Display IP Address) to "ON." You can do this from
the operation panel or from WIM.
-
Can not print Thai/Latin characters using the PS
driver.
Important: To use these new features, you need to install
all of the following firmware together as a set.
Websys v1.05 or later (P/N #G1045235C)
Controller v1.07.2 or later (P/N #G1045239F)
Printer v1.07.2 or later (P/N #G1045243F)
When PCL data is printed using HDD fonts, print
speed might be reduced.
After a certain number of PCL jobs are printed using
HDD fonts, the device may stall
(GFPR#RE05060001).
Fixed: Data containing multiple jobs that have
the PJL parameters START and END, might be
cancelled (GFPR#RA05070002).
B
ulletin
Date:
24-Feb-05
Symptom Corrected
PAGE: 2/2
No.:
RG104003e
Advertisement
