Advertisement
Reissued: 10-Apr-06
Model:
Model G-P1
Version
Title
1.11
Fusing temperature
defaults
1.12:01
Meter charge mode Other changes (specification change):
T
B
echnical
1. The default fusing temperature for low-
temperature environments was changed for Plain
Paper Type 1:
167 170C
2. A new segment was added to the machine's
environment detection system for Plain Paper
Type 1:
Low to medium-temperature environments
(default fusing temperature: 164C).
3. The default fusing temperature for the first sheet
was increased for all paper types and all
environment segments:
Default +2C.
PM alert messages will be displayed even in
Meter Click Mode (refer to RTB RG104012).
Important: To use the above new feature, you
need to install all of the following firmware
together as a set.
System v1.10 or later (P/N #G1045243J)
Printer v1.10 or later (P/N #G1045239J)
Engine v1.12:01 or later (P/N #G1045130H)
ulletin
Date:
24-Feb-05
Symptom Corrected
PAGE: 2/2
No.:
RG104001c
Advertisement
