Advertisement
Reissued: 15-Apr-05
Model:
General RTB
7.2 Error Code List
Error
Code
51
The machine cannot be updated.
•
The machine is processing a print
job.
The machine is processing a scan
•
job.
The machine is receiving image data
•
from the network.
The control panel is in use.
•
•
The machine is sending or receiving
a fax.
•
The machine has detected a
problem corresponding to an SC
(service call) number (SC640 to
SC649, SC670 to SC679, SC691,
SC818, SC819, SC820 to SC839,
and SC990).
52
The file contains erroneous data.
•
The data is too large or too small.
•
The CRC (cyclic redundancy check)
value and the checksum do not
match.
The firmware does not match the
•
target machine.
The firmware was not completely
•
uploaded or is corrupt.
53
An error occurred while updating.
•
The machine is off.
T
echnical
Description/Causes
B
ulletin
Date:
15-Nov-04
Solutions
Check that the machine is idle, and then try
updating again.
If an SC number appears, contact your
service representative.
Download the correct file from the website,
and then try updating again.
If using a DNS server, the machine's IP
address might have been changed.
Check the IP address, and then try
updating again.
PAGE: 15/15
No.:
RGene019a
Advertisement
