Advertisement
Reissued: 10-Apr-06
Model:
Model G-P1
Version
Title
1.06.01
Communication
Error
Firmware update
1.07.2
One feature of a
customization added
RC Gate firmware
update
1.08.1
RC Gate firmware
update
1.09
Login
Machine stalls
WebImageMonitor
1.10
Meter charge mode Other changes (specification change):
T
B
echnical
A communication error occurs between the
mainframe and RC Gate.
The user authentication data is cleared during a
firmware update. As a result, the new firmware
cannot be installed with RC Gate.
The following feature from a customization was
added as standard:
Sp5-055-001 (Display IP Address):
Displays the IP address on the second line of the
operation panel when the printer is in the Ready
condition.
0: OFF (default)
1: ON
Important: To use these new features, you need to install
all of the following firmware together as a set.
Websys v1.05 or later (P/N #G1045235C)
Controller v1.07.2 or later (P/N #G1045239F)
Printer v1.07.2 or later (P/N #G1045243F)
Sometimes, the firmware cannot be updated via RC
Gate.
The firmware cannot be updated if the administrator
password is blank.
If the device receives more than 300 login attempts
without cycling the power, the administrator will not
be able to login to the device via WIM. If user code
authentication is on, users will not be able to print.
After a large number of documents (more than 9K)
are printed in color, the device will stall.
Fixed: The menu for the Rom Update may not be
displayed in the WebImageMonitor.
PM alert messages will be displayed even in
Meter Click Mode (refer to RTB RG104012).
Important: To use the above new feature, you
need to install all of the following firmware
together as a set.
System v1.10 or later (P/N #G1045243J)
Printer v1.10 or later (P/N #G1045239J)
Engine v1.12:01 or later (P/N #G1045130H)
ulletin
Date:
24-Feb-05
Symptom Corrected
PAGE: 2/2
No.:
RG104002f
Advertisement
