Advertisement
Reissued: 15-Apr-05
Model:
General RTB
11. After the firmware has been updated, the machine must restart. This may be
automatic depending on the firmware and model.
12. Enter "bye" to exit ftp.
ftp> bye
C:\>
13. Check the firmware version as shown in step 6.
14. Update all required firmware by repeating steps 1 to 13 as necessary.
5.4 RFU for UNIX(LINUX)
1. Logon to the machine using ftp.
host% ftp "ip address"
User ("ip address"): User Name (for Administrator)
230 User xxxx logged in.
331 Password required for rsysupdate.
Password: Password (for Administrator)
230 User xxxx logged in.
Connected to "ip address"
Remote system type is UNIX.
Using binary mode to transfer files.
2. Change to binary mode.
ftp> binary
200 Type set to I.
3. Send the firmware data (*.rru or *.rfu) to the machine.
ftp> put "File Name of Firmware"
200 PORT command successful.
150 Opening BINARY mode data connection for "File Name of Firmware".
226 Transfer complete.
ftp: nnnnnn bytes sent in s.ss Seconds pp.p Kbytes/sec.
ftp>
4. Close the ftp session.
ftp> bye
host%
T
B
echnical
ulletin
Date:
15-Nov-04
PAGE: 9/15
No.:
RGene019a
Advertisement
