Advertisement
Reissued: 2-Nov-05
Model:
Model G-P1
RTB Correction
The items in bold italics have been corrected or added.
Subject:
Controller firmware (printer system) release note for
G-P1
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
This RTB has been issued to announce the printer system firmware release information for
the Model G-P1 controller board.
Printer system
Version
1.02
1.03
1.04.1
1.05
1.06.1
1.07.2
1.08.1
1.09
Printer System
Version
1.02
1.03
SC818 with email
sending
SC818 with Energy
Saver Mode
1.04.1
Simplified Chinese
1.05
Double count
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Program No.
G1045243A
G1045243B
G1045243C
G1045243D
G1045243E
G1045243F
G1045243G
G1045243H
Title
-
1st mass production
SC818 occurs when the machine sends email if the
mail server uses GIGEST-MD5 SMTP
authentication.
SC818 occurs when the machine is in Energy Saver
Mode.
Wording corrections (simplified Chinese).
The total counter and optional counters are
incremented twice (+2) for one sheet.
Conditions:
The paper is fed from the Bypass tray.
-
Paper size: 594mm or longer (total counter), or
-
558mm or longer (key card counter, other
optional counters).
B
ulletin
Date:
Prepared by:
Part information
Electrical
Transmit/receive
Effective Date
1st mass production
1st mass production
March 2005 production
April 2005 production
June 2005 production
July 2005 production
August 2005 production
October 2005 production
Symptom Corrected
No.:
24-Feb-05
K. Moriizumi
Action required
Service manual revision
Retrofit information
PAGE: 1/2
RG104002e
Advertisement
