Advertisement
Reissued: 09-Sep-08
Model:
Model G-P1
RTB Correction
The items in bold italics have been corrected or added.
Subject:
Controller firmware (printer) release note for G-P1
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
This RTB has been issued to announce the printer firmware release information for the
Model G-P1 controller board.
Printer
Version
1.12
1.11
1.10
1.09
1.08.1
1.07.2
1.06.1
1.05
1.04.1
1.03
1.02
Printer
Version
1.12
Other changes
1.11
PCL
RPCL
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Program No.
G1045239L
G1045239K
G1045239J
G1045239H
G1045239G
G1045239F
G1045239E
G1045239D
G1045239C
G1045239B
G1045239A
Title
The firmware was modified to support the new
Fujitsu hard disk drive.
Fixed: The device might stall if it receives a PCL XL job
containing an image. Only images created by specific
graphics applications such as Route66 will trigger the
problem.
Fixed: The device might stall if it receives an RPCS job
after another RPCS job was canceled by an
authentication error.
Fixed: An RPCS job that contains a lot of graphic/image
objects might be canceled with an "Insufficient Memory"
error.
B
ulletin
Date:
Prepared by:
Part information
Electrical
Transmit/receive
Effective Date
September 2008 production
May 2006 production
November 2005 production
October 2005 production
August 2005 production
July 2005 production
June 2005 production
April 2005 production
March 2005 production
1st mass production
1st mass production
Symptom Corrected
No.:
24-Feb-05
K. Moriizumi
Action required
Service manual revision
Retrofit information
PAGE: 1/3
RG104003h
Advertisement
