Accessories - Measurement Computing Data Translation DT3010 Series User Manual

Accessories

The following optional accessories are available for DT3010 Series boards:
• DT740 screw terminal panel – Screw terminal panel with two connectors to
accommodate the analog I/O, digital I/O, and counter/timer signals provided by the
DT3010, DT3010/32, and DT3016 boards.
• EP307 cable – A 1-meter, twisted-pair, shielded cable that connects the 50-pin analog I/O
connector (J1) on the DT3010, DT3010/32, and DT3016 boards to the J1 connector on the
DT740 screw terminal panel.
• EP308 cable – A 1-meter, twisted-pair, shielded cable that connects the 68-pin digital I/O
connector (J2) on the DT3010, DT3010/32, and DT3016 boards to the J2 connector on the
DT740 screw terminal panel.
• STP268 screw terminal panel – Screw terminal panel with one 68-pin connector to access
the signals provided by one of the connectors on the DT3010-268 or DT3010/32-268 board.
If you want to access all of the functionality of the DT3010-268 or DT3010/32-268 at the
same time, you need two STP268 screw terminal panels.
• STP268-EC screw terminal panel – Screw terminal panel with two 26-pin connectors for
attaching to 5B or 7B Series signal conditioning backplanes, one 50-pin connector for
attaching to the Opto-22 PB16H backplane, and one 68-pin connector for attaching to the
DT3010-268 or DT3010/32-268 board.
• EP324 cable – A 1 1/2-inch ribbon cable that connects to the 68-pin digital I/O connector
(J2) on the DT3010-268 or DT3010/32-268 board; the other end of this cable provides a
68-pin connector and face plate for connection to an EP325 cable. This cable is shipped
with each DT3010-268 or DT3010/32-268 board.
• EP325 cable – A, 6-foot, SCSI-3 cable that connects the STP268 or STP268-EC screw
terminal panel to connector J1 on the DT3010-268 board.
• 5B01 or 5B08 backplane and 5B Series modules – The 5B01 is a 16-channel backplane; the
5B08 is an 8-channel backplane. Both backplanes accept 5B modules for signal
conditioning applications, including measuring thermocouples, RTDs, voltage input,
current input, strain gage input, and frequency input.
To use the 5B series backplanes and modules with the STP268-EC, you need the following
additional accessories available from Data Translation:
− AC1315 cable – A 2-foot cable with a 26-pin connector on each end that connects a 5B
Series signal conditioning backplane to connector J2 on the STP268-EC screw terminal
panel.
− PWR-977 power supply – A 5 V, 3 A power supply for powering the 5B Series
backplanes.
• 7BP16-1, 7BP08-1, or 7BP04-1 backplane and 7B Series
modules – The 7BP16-1 is a 16-channel backplane, the 7BP08-1 is an 8-channel backplane,
and the 7BP04-1 is a 4-channel backplane. All three backplanes accept 7B modules for
signal conditioning applications, including measuring thermocouples, RTDs, voltage
input, current input, strain gage input, and frequency input.
To use the 7B series backplanes and modules with the STP268-EC, you need the following
additional accessories available from Data Translation:
Overview
19