Measurement Computing Data Translation DT3010 Series User Manual page 149

Chapter 7
The DT3010 Series Device Driver provides support for the analog input (A/D), analog output
(D/A), digital input (DIN), digital output (DOUT), and counter/timer (C/T) subsystems. For
information on how to configure the device driver, refer to
Total Subsystems on Board
a. The second D/A subsystem has limited capabilities and is used for threshold triggering
b. DIN and DOUT subsystems use the same DIO lines.
The tables in this chapter summarize the features available for use with the DT-Open Layers
for .NET Class Library and the DT3010 Series boards. The DT-Open Layers for .NET Class
Library provides properties that return support information for specified subsystem
capabilities.
The first row in each table lists the subsystem types. The first column in each table lists all
possible subsystem capabilities. A description of each capability is followed by the property
used to describe that capability in the DT-Open Layers for .NET Class Library.
Note: Blank fields represent unsupported options.
For more information, refer to the description of these properties in the DT-Open Layers for
.NET Class Library online help or DT-Open Layers for .NET Class Library User's Manual.
148
Table 14: DT3010 Series Subsystems
DT3010 Series
only. It has an output range of ±10 V.
A/D D/A DIN DOUT
a b
1 2 2 2
page 34.
C/T QUAD
b
4 0