Detailed Operation Description - Hisense Covidien HME2C26 User Manual

Operational Instructions and Function Adjustment

Detailed Operation Description

Picture
In the power-on state, you can adjust the display parameters in each mode of this monitor.
Adjustment Procedure

Press MENU to call out the User menu.
Press ▲UP or ▼DOWN to select

Press ▲UP or ▼DOWN to select a target item and then press

lower-level menu. In each sub-menu, press ▲UP or ▼DOWN to select a specific item or adjust
the value.

Press SWAP to return to the previous menu or exit the main menu.

Gamma
Set Gamma to adjust the Gamma curve displayed by an image.
Options are Gamma1.8, Gamma2.0, Gamma2.2, Gamma2.4, Gamma2.6, and γC.
Note

YC is a Gamma curve customized based on the user demands.

color temperature
It is used to adjust the color temperature of the displayed image.
Options are 5600K, 6500K, 7500K, 8000K, 9300K, and User.
Note

You can select User to adjust the color temperature value. The value range of R, G, and B is all
0-100.
, and then press
Mode
User1
Gamma
color temperature
Brightness
Contrast
Off
RPE
Advanced
Return
OK
22
MENU to enter the Picture menu.
MENU and OK to enter the
Picture
Select