Hisense Covidien HME2C26 User Manual page 38

Operational Instructions and Function Adjustment

Location
It is used to set the display position of the User menu.
Options are Upper Left, Bottom Left, Upper Right, Bottom Right, and Center.

Time-out
It is used to set the display time of the User menu.
Options are 10s, 20s, 30s, 60s, and 120s.
System
Adjustment Procedure

Press MENU to call out the User menu.
Press ▲UP or ▼DOWN to select

Press ▲UP or ▼DOWN to select a target item and then press

lower-level menu.
In each sub-menu, press ▲UP or ▼DOWN to select a specific item or adjust the value.
Press SWAP to return to the previous menu or exit the main menu.

Hisense LOGO
It is used to set whether to display the Hisense LOGO upon power-on.
Options are Enable and Disable.
Note

The Hisense LOGO is displayed only when the monitor is powered on.

The default value is Enable.
, and then press
Hisense LOGO
Power Saving
Mode Control
Mode Rename
All Reset
Monitor Info
Return OK
28
MENU to enter the System menu.
MENU and OK to enter the
System
Enable
Enable
Select