Product Description - Hisense Laser TV Display Screen Installation Manual

Product Description

The Hisense Laser TV Display Screen has a bezel trim and is designed to be used in rooms where the ceiling light cannot be
moved.
Maintaining the Screen
Dust, dirt and scratches on the screen will affect how images appear. Follow the instructions below to properly maintain the
screen.
1) The screen surface has a horizontal structure. DO NOT wipe the screen up and down or in a circular motion.
Wipe from left to right only.
2) Clean the dust on the screen surface with a soft brush or microfiber cloth. A rough towel or cloth might damage the surface.
3) Gently wipe the screen with a moistened microfiber cloth with mild soap diluted in water.
IMPORTANT:
Take heed to the following precautions at all times in order to avoid damaging the
screen. It is not covered under warranty.
• Don't touch the screen material to avoid leaving fingerprints. Use gloves when handling the material.
• Don't scratch the material, as it will leave permanent markings on the screen's surface.
• Don't point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
• Don't use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such chemicals
will permanently damage the screen.
Required Tools to Install the Screen
Tape measure
Screwdriver with 5/16"(8mm)
drill bit for wood stud
Hardware and Parts List for Screen Mounts
ST5.5x70 Screws (x4)
Bracket wands (x2)
460mm
Drill bolt 8 x 60,
(x4)
Polyamide 6 (PA6)
Stud finder
Hammer for concrete
anchors
M3x6 Screws (x6)
Bracket wands (x2)
500mm
Paper template (x1)
Level
Phillips screwdriver
Hanging component (x2)
Bracket wands (x2)
269mm
1
Pencil
Tape
Handle (x2)
Velcro strips (x4)