Safety Information And Precautions - Hisense Covidien HME2C26 User Manual

Read the following information thoroughly before using the LCD monitor:
Safety Precautions

The LCD monitor has passed safety certification testing and can be used reliably and safely.
Please read this section and the precautions on the LCD monitor thoroughly to ensure safe use and
correct maintenance and to avoid accidents and man-made damage. Contact Hisense if you
encounter any problems when using the LCD monitor.

The medical certified special power adapter MDS-150AAS24 B that is manufactured by Delta and
attached to this device must be used. The adapter has an input voltage of 100-240 VAC, a
frequency of 50-60 Hz, and an output voltage of 24 VDC. When the power adapter is damaged,
contact Hisense or an authorized distributor. Do not use another type of power adapter. Connect
this device to a grounded power supply to avoid electric shock.

To avoid hazards, do not place the LCD monitor on a soft pad. If the LCD monitor will not be used
for a long time, disconnect its power cable. The LCD monitor contains hazardous high voltage
inside, so do not disassemble it by yourself. This device must be maintained by qualified personnel.
If the device has any error, please contact Hisense or our authorized distributors.

Install the device near a socket easy to use. Do not place sundries around the power disconnect
devices such as switches, power plugs, and appliance couplers. These devices should be
convenient to operate.

Use licensed power cables that match the voltage of the power socket and meet the safety
standards of the country or region where the power cables are used. Never overload the power
socket. Use qualified sockets that have passed national safety certification.

Power cable protection (USA: power cable): Put power cables in places where they are difficult to
be stepped on or squeezed by objects above or against them, and special attention should be paid to
the plug and socket positions of the power cables.

Do not expose this device to any rainy or moisture places. Keep the LCD monitor away from any
high-temperature and heat-generating object.

Do not use this device in any environment where flammable anesthetic is mixed with air, oxygen
or nitrous oxide.

Do not touch any non-application part of this device when it is running to avoid discomfort caused
by the high temperature of the device.
Remarks

The LCD monitor is intended for use in the target sales regions. If it is used outside these regions,
its performance may be different from the specifications.

It is recommended that you use the specified accessories of the LCD monitor, which can be used
only with the spare parts and accessories that are manufactured or specified by Hisense. Before
operation, test and verify all the devices and the settings.

Safety Information and Precautions

II