Hisense Covidien HME2C26 User Manual page 5


Final users must set a backup system when using this device, to avoid video loss.

It takes about 30 minutes for the electronic components of the LCD monitor to achieve stable
performance. It is recommended that you start the LCD monitor in advance to ensure display
accuracy.

Condensation may form inside and outside the LCD monitor if the LCD monitor is of low
temperature and moved into a room or the room where it is located experiences fast temperature
rise. In this case, turn on the monitor after the condensation disappears; otherwise, the monitor will
be damaged.

Do not cover or block any ventilation holes on the device housing. When the monitor is installed in
a closet or other closed environments, keep a certain gap between the monitor and sides of the
closet.

To avoid brightness change caused by long-term use and maintain stable brightness, it is
recommended that you use the monitor at low brightness.

Keep the high-frequency electrotome away from this monitor, and cables or devices connected to
this monitor. The high-frequency electrotome, when turned on, may interfere with nearby devices.
The OSD menu of the monitor may be activated by interference, affecting the monitor function.
The image display may be abnormal due to interference, affecting the viewing effect.

It is recommended that you clean the LCD monitor exterior periodically to extend its service life.

Do not clean or maintain the monitor when it is powered on. Remove the monitor power cable for
cleaning or maintenance.

Do not modify the monitor without authorization of the manufacturer.

It is strongly recommended that you prepare a backup monitor for important tasks.

If you do not need to use the monitor for a long time, disconnect the monitor from the power
socket to avoid damage to the monitor caused by transient voltage.

To completely power off the monitor, remove the power plug from the power socket.

Safety Information and Precautions
Description and Maintenance of the LCD monitor
Preventive maintenance is not required. But regular maintenance and check is required to
check whether the monitor is in its best state to ensure its safe running. It is recommended
that you check the monitor function and safety regularly, for example, at least once every
year.

The screen is a key component of the LCD monitor and requires periodic maintenance.

Do not squeeze the edges of the LCD monitor or frame. Failure to comply may cause display
failure.

Do not touch or press the monitor with sharp objects, which may cause damage to the screen.

Do not use organic solvents such as alcohol and gasoline, or chemical reagents such as acid and
alkali to contact the housing or monitor, which may lead to gloss reduction, fading, and image
quality reduction of the housing or monitor.
Safety Information and Precautions
III