Hisense Covidien HME2C26 User Manual page 36

Operational Instructions and Function Adjustment
PIP/PBP
Adjustment Procedure

Press MENU to call out the User menu.
Press ▲UP or ▼DOWN to select

Press ▲UP or ▼DOWN to select a target item and then press

lower-level menu. In each sub-menu, press ▲UP or ▼DOWN to select a specific item or adjust
the value.

Press SWAP to return to the previous menu or exit the main menu.

INPUT1
It is used to select the primary signal input port.
Options are Auto, DVI 1, DVI 2, SDI, VGA, and YPbPr
Note

For precautions, see Shortcut Menu Operation-Signal Input Selection.

INPUT2
It is used to select the second signal input port.
Options are Auto, DVI 1, DVI 2, SDI, VGA, and YPbPr
Note

For precautions, see Shortcut Menu Operation-Signal Input Selection.

PIP/PBP
It is used to adjust the multi-window display mode, image position, and image transparency.
Option Definition
It is used to set different PIP/PBP display modes.
PIP/PBP
Options are Off, Large PIP, Medium PIP, Small PIP, Level PBP, and Fill PBP.
, and then press
Return OK Select
26
MENU to enter the PIP/PBP menu.
MENU and OK to enter the