Page 1
HMD3G21S User Guide Read the User Guide thoroughly before using Hisense LCD monitor and keep it properly for future reference. RSAG2.025.6601SS B Version Hisense website: www.hisense.com...
Page 2
Read the User Guide thoroughly before using the LCD monitor and keep it properly for future reference. Hisense shall not be liable for any accidents arising from violations of the safety precautions and use instructions of the User Guide.
It is recommended that you use the specified accessories of the LCD monitor, which can be used only with the spare parts and accessories that are manufactured or specified by Hisense. It takes about 30 minutes for the electronic components of the LCD monitor to achieve stable performance.
Page 4
To avoid hazards, do not place the LCD monitor on a soft pad. If the LCD monitor will not be used for a long time, disconnect its power cable. The LCD monitor contains hazardous high voltage inside, so do not disassemble it by yourself. If the LCD monitor is abnormal, contact Hisense or an authorized distributor.
Contents Preface ..............................I Safety Information and Precautions ....................II Contents ..............................1 Overview .............................. 2 Features ............................2 Technical Specifications ....................... 3 Accessories ............................ 4 Installation ............................5 Front and Rear Views of the LCD Monitor .................. 5 Front View of the LCD Monitor and Buttons ................6 Rear View of the LCD Monitor and Input Ports ................
Overview Thank you for purchasing Hisense LCD monitor, which complies with the DICOM Part 14 standard and is applicable to DSA, MRI, DR, CR, CT, and PET medical imaging. It is intended for professionally trained medical staff and provides the image viewing and medical diagnostic functions.
Overview Technical Specifications Model HMD3G21S Name LCD monitor Size 21.3 inches (540 mm) Panel type Gray scale LCD panel (IPS) Resolution 2048 pixels (H) x 1536 pixels (V) Display area 433.15 mm (H) x 324.86 mm (V) Pixel pitch 0.2115 mm (H) x 0.2115 mm (V)
The accessory list is for reference only. If any component is lost or damaged, promptly contact Hisense or the specified distributor. Keep the original package properly. If you need to return this product, be sure to use the original package. Do not place any heavy weight on top of the package during transportation.
Installation Front and Rear Views of the LCD Monitor Original packaging The monitor is lifted to the highest position Rotate 90° clockwise to change to vertical Rear view of the LCD monitor in vertical orientation orientation CAUTION When adjusting the height of the monitor, hold the left and right sides of the monitor with both hands.
Installation Front View of the LCD Monitor and Buttons Note For instructions on using the buttons, see the "Operational Instructions and Function Adjustment" section.
Installation Rear View of the LCD Monitor and Input Ports Port Function Power port Connected to the power adapter. Connected to a PC for LCD monitor debugging or parameter setting. Input: USB1 (uplink port) 5 V, 1 A. DP IN/DVI Connected to the digital output port on the graphics card of the PC.
Installation Hanging Arm Installation Remove the base assembly to install the required hanging arm or base. Follow the instructions in the User Guide when installing the hanging arm or base. Before using the hanging bracket or base provided by another manufacturer, ensure that it meets the following requirements and complies with the VESA standard: –...
Installation Cable Connection The LCD monitor provides multiple connections to a PC and allows you to switch to any of the channels for display. The following figure shows the PC connection diagram. DVI port DP IN port DP OUT port Digital Digital Digital...
Installation Use the DP OUT terminal to connect to another monitor as follows: Output the input signals of the DP IN channel to another monitor through the DP OUT channel to implement dual-screen independent display. The daisy chain must be supported by the graphics card. DP IN port DP OUT port DP IN port...
Operational Instructions and Function Adjustment Operational Instructions Operational Instructions Buttons of the LCD monitor When the LCD monitor is in vertical orientation, seven adjustment buttons and a power indicator exist in the lower right corner of the monitor frame. The following table lists the functions of them. Button Function Light box button.
Operational Instructions and Function Adjustment Mode Selection When the LCD monitor is in the power-on state, you can select different display modes. Mode Definition DICOM Compliant with DICOM Part 14. User mode Compliant with Gamma, with support for custom parameter settings. Procedure: Mode Custom...
Operational Instructions and Function Adjustment Backlight Highlight After power-on, you can set the LCD monitor to enter the backlight highlight state. Procedure: 1) Press ▲ to enter the backlight highlight state. 2) Press any button to exit the backlight highlight state. Note ...
Operational Instructions and Function Adjustment Setting and Adjustment Press the button on the LCD monitor to go to the User menu. Display Settings User menu Press ▲/▼ to select the main menu item you want to Mode adjust or set, and press to go to the next menu.
Page 19
Operational Instructions and Function Adjustment Mode Select the display mode to be adjusted. The following table lists the initial values of all modes. Mode Brightness (cd/m Gamma Value Custom Gamma 2.2 DICOM200 DICOM DICOM250 DICOM DICOM300 DICOM DICOM350 DICOM DICOM400 DICOM DICOM450...
Operational Instructions and Function Adjustment Set Scale to adjust the image display effect. The options include Full Screen, Zoom In, and Normal. The default value is Full Screen. Option Definition The image is displayed in full screen mode. Full Screen The image may be deformed due to the difference between the image resolution and screen resolution.
Operational Instructions and Function Adjustment Procedure: User menu Power Saving manager 1) Press the button on the LCD monitor to go to Power the User menu. Ambient Sensor Body Sensor 2) Press ▲/▼ to select the icon, and press go to the Power Saving manager menu on the right.
Page 22
Operational Instructions and Function Adjustment Procedure: Power Saving manager User menu Auto Calibration 1) Press the button on the LCD monitor to go to the Auto Validation User menu. 2) Press ▲/▼ to select the icon. Press to go to the Calibration Settings menu on the right.
Operational Instructions and Function Adjustment User Menu – Monitor Settings In the power-on state, the Monitor Settings menu provides the Language, LOGO, Signal Input, and Monitor Info items. Procedure: Monitor Settings User menu Menu Location Upper Left 1) Press the button on the LCD monitor to go to the User menu.
Page 24
Operational Instructions and Function Adjustment The LCD monitor automatically enters sleep mode when it detects no output signals for several seconds, and the power indicator lights on in orange. While the LCD monitor is in sleep mode, the system automatically wakes up display when detecting an input signal.
Troubleshooting Troubleshooting Before repair, check the following table to see if you can identify the cause of the fault. If the fault persists after you follow the instructions in the User Guide, you can consider repair. Fault Symptom Solution Check whether the power plug is securely connected to the socket.
Consult Hisense. Use the power adapter and power cable provided by Hisense, and ensure that the LCD monitor is properly connected to ground. Do not modify or retrofit the LCD monitor by yourself. Failure to comply with cause interference and damage to the LCD monitor.
Environmental Protection Information Environmental Protection Information The LCD monitor meets the environmental protection requirements of the Administrative Measures for Limiting the Use of Hazardous Substances in Electrical and Electronic Products. During its environmental-friendly service life, the LCD monitor does not cause leakage and precipitation of harmful substances and other problems affecting the health of users in the process of use, so it can be used safely.
User Guide but encounters equipment failure, parts damage, or monitor brightness not reaching the brightness value recommended in the User Guide, Hisense will repair or replace the product according to its own judgment.
Appendix: List of Terms Digital Imaging and Communications in Medicine (DICOM) DICOM was jointly developed by American College of Radiology (ACR) and National Electrical Manufacturers Association (NEMA). DICOM-compatible device connections can transmit medical images and data. DICOM Part 14 specifies the standard display functions of medical gray scale images.
Page 30
Qingdao Hisense Medical Equipment Co., Ltd. Address: North, 3F, Outsourcing Center of Software Park, No. 169, Songling Road, Laoshan District, Qingdao, P.R.China Hisense national customer service hotline: 4009940707 Hisense service supervision email: haixinfuwu@hisense.com...