Hisense Covidien HME2C26 User Manual page 26

Operational Instructions and Function Adjustment
Option
Factory
DICOM
User1
User2
User3
User4
User5
User6
Adjustment Procedure

Press MODE to call out the Mode menu.
Press ▲UP or ▼DOWN to switch among modes.


Press MODE to exit the current menu.
Note
MODE is effective, both ▲UP and ▼DOWN are effective. The indicator color is

When
green. Other buttons are locked and their indicator color is white.

RPE Effect Selection
In the power-on state, you can turn on or off RPE.
When this function is turned on, Level1, Level2, and Level3 effects can be selected.
Adjustment Procedure

Press to call out the RPE menu.
Press ▲UP or ▼DOWN to select different options.


Press RPE to exit the current menu.
Note
When RPE is effective, both ▲UP and ▼DOWN are effective. The indicator color is green. Other
buttons are locked and their indicator color is white.

Signal Input Selection
In the power-on state, you can press INPUT1/INPUT2 to select the signal input channels. Options are
Auto, DVI 1, DVI 2, SDI, VGA, and YPbPr.
Adjustment Procedure
Press INPUT1/INPUT2 to exit the INPUT1/INPUT2 menu.
Press ▲UP or ▼DOWN to switch among options.
Press INPUT1/INPUT2 to exit the current menu.
Definition
The optimal display mode preset in the factory
Compliant with DICOM Part 14
Compliant with Gamma, with support for custom parameter settings
Compliant with Gamma, with support for custom parameter settings
Compliant with Gamma, with support for custom parameter settings
Compliant with Gamma, with support for custom parameter settings
Compliant with Gamma, with support for custom parameter settings
Compliant with Gamma, with support for custom parameter settings
16