Table of Contents
Advertisement
System Architecture
JTAG Emulation Port
The JTAG emulation port allows an emulator to access the internal and
external memory of the processor through a 6-pin interface. The JTAG
emulation port of the processor also connects to the USB debugging inter-
face. When an emulator connects to the board at
interface is disabled. This is not a standard connection of the JTAG
interface.
For information about the standard connection of the interface, see EE-68
published on the Analog Devices Web site. For more information about
the JTAG connector, see
more about available SHARC emulators, go to Analog Devices Web site:
http://www.analog.com/processors/sharc/evaluationDevelop-
ment/crosscore/index.html
2-8
www.BDTIC.com/ADI
"JTAG Header (ZP4)" on page
.
ADSP-21369 EZ-KIT Lite Evaluation System Manual
, the USB debugging
ZP4
2-25. To learn
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-21369 EZ-KIT Lite and is the answer not in the manual?
Questions and answers