Elvis Function Generator Configuration Switch (Sw13) - Analog Devices ADSP-21369 EZ-KIT Lite Manual

Switches
Table 2-7. Oscilloscope Configuration Switch (SW1)
Channel
A
A
A
A
B
B
B
B
1 Bold typeface denotes the default settings.
ELVIS Function Generator Configuration Switch
(SW13)
The function generator configuration switch (
connect to the left and right input signals of the audio interface. The
switch is used only when the board is connected to the ELVIS station (see
"ELVIS Interface" on page
selected at a time, as described in
Table 2-8. ELVIS Function Generator Configuration Switch (SW13)
Channel
AMP_LEFT_IN
AMP_RIGHT_IN
AMP_LEFT_IN
AMP_RIGHT_IN
2-14
www.BDTIC.com/ADI
Switch Position
1
1 (OFF )
2 (OFF)
3 (OFF)
4 (OFF)
5 (OFF)
6 (OFF)
7 (OFF)
8 (OFF)
1-9). Each channel must have only one signal
Table
Switch Position
1
1 (ON )
2 (ON)
3 (OFF)
4 (OFF)
ADSP-21369 EZ-KIT Lite Evaluation System Manual
Audio Circuit Signal
AMP_LEFT_IN
AMP_RIGHT_IN
LEFT_OUT
RIGHT_OUT
AMP_LEFT_IN
AMP_RIGHT_IN
LEFT_OUT
RIGHT_OUT
) controls which signals
SW13
2-8.
Audio Signal
LEFT_IN
RIGHT_IN
DAC0
DAC1
SW13