Installing The Net Ware Lient And Server; Overview; Installing The Netware Client Driver; About 3Com Intelligent Auto Install Software - 3Com 3C905C-TX-M User Manual

4

Overview

This chapter describes how to:
To obtain the latest shipping version of a driver, go to:
http://www.3com.com/

Installing the NetWare Client Driver

The NetWare client driver enables PCs running DOS,
Windows 3.x, or Windows for Workgroups to access
resources on a NetWare 3.x, 4.x, or 5.x network.
Use the 3Com intelligent auto install software (COMSLINK) to
install the client software and drivers for Novell NetWare 3.x,
4.x, or 5.x.
Do not use the intelligent auto install software if you are
running Windows 95, Windows 98, or Windows NT. See
"Installing NIC Software in
install network drivers under these operating systems.

About 3Com Intelligent Auto Install Software

The 3Com intelligent auto install software automatically
configures your NIC and PC for use as a NetWare client.
The intelligent auto install software creates a
new AUTOEXEC.BAT file and saves the old file as
AUTOEXEC.3CM. It also creates a new CONFIG.SYS
file and saves the old file as CONFIG.3CM.
The 3Com intelligent auto install software does not
support Japanese versions of DOS and Windows 3.1x.
I
NSTALLING THE
C
LIENT AND
Install the Novell NetWare client driver for DOS,
Windows 3.1, or Windows for Workgroups.
Install the NetWare 3.x, 4.x, and 5.x server drivers.
N
ET
S
ERVER
Windows" for procedures to
W
ARE
D
RIVERS