3Com 3C905C-TX-M User Manual page 31

30 C 2: I
HAPTER
The following table shows the cable requirements and
maximum network cable lengths for the RJ-45 port.
Network
Environment
10 Mbps
(10BASE-T)
100 Mbps
(100BASE-TX)
To connect the RJ-45 port:
1 Plug the RJ-45 connector on the twisted-pair network
cable into the RJ-45 port on the NIC backplate.
T X D
2 Connect the other end of the network cable to an
active network port.
The next step is to install the network driver.
Go to
or Chapter
Server
C
NSTALLING AND ONNECTING THE
Cable Required
Category 3, 4, or 5
unshielded twisted-pair
Category 5 unshielded
twisted-pair
a ta
A C T
L
1 0
N
K
1 0 0
Chapter 3, "Installing NIC Software in
4, "Installing the NetWare Client and
Drivers."
NIC
Maximum
Cable Length
100 m (328 ft)
100 m (328 ft)
Windows,"