3Com 3C905C-TX-M User Manual page 28

7 Secure the NIC with the screw you removed earlier.
If you want to install the Remote Wake-Up cable, go
to the next section,
Cable" to continue the installation. If you do not want to
connect the cable, continue with
8 Replace the PC cover and plug in the power cord.
Do not turn on the power to the PC.
The next step is to connect the NIC to the network. Go to
"Connecting the NIC to the
Inserting the NIC in the PC
1 Remove slot cover
2 Insert NIC
"Connecting the Remote Wake-Up
Network."
PCI slots
step 8.
27