3Com 3C905C-TX-M User Manual page 41

40 C 3: I
HAPTER
2 Make sure that the EtherCD is inserted in the
CD-ROM drive.
3 Click OK.
The Insert Disk dialog box appears.
4 Open the pull-down menu and select:
c:\windows\options\cabs
5 Click OK.
Files are copied.
If you are prompted for the EtherCD, click OK, make sure
that the drive letter of the CD-ROM drive (for example,
d:\) appears in the dialog box, and then click OK.
You are prompted for the Windows 98 CD.
6 Remove the EtherCD, insert the Windows 98 CD,
and then click OK.
Files are copied. You are prompted to restart the PC.
7 Remove the Windows 98 CD, and then click Yes to
restart the PC.
You must restart the PC to complete the installation.
The installation is complete. Go to the next section,
"Verifying Successful
NIC is properly installed.
After Windows restarts, double-click the Network icon
in the Windows Control Panel and make sure that the
correct configuration settings are selected for your
network environment. Contact your system administrator
for assistance.
NIC S
NSTALLING OFTWARE IN
Installation," to confirm that the
W
INDOWS