Network Management Requirements; Installing The 3Com Dmi Agent - 3Com 3C905C-TX-M User Manual

Network Management Requirements

Your network management station requires a
DMI-compatible browser or a network management
application that supports DMI 2.0, such as:

Installing the 3Com DMI Agent

This section describes how to install the 3Com DMI Agent on
a PC running Windows 95, Windows 98, or Windows NT 4.0.
For instructions on how to install the 3Com DMI Agent
on a PC running Windows NT 3.51, see the 3Com DMI
User Guide included with the 3Com DMI Agent software
on the EtherCD.
Before installing the DMI Agent, logon to the PC with an
account that has system administration privileges.
To install the 3Com DMI Agent:
1 Make sure that the PC meets the requirements listed
in "Client PC
2 Make sure that the EtherLink NIC is installed in the PC
and is connected to the network.
3 Insert the EtherCD in the CD-ROM drive.
The EtherCD Welcome screen appears.
If the EtherCD Welcome screen does not appear, enter
the following command from Run option of the
Windows Start menu:
d:\setup.exe
where d:\ represents the letter name of the CD-ROM drive.
Hewlett Packard TopTools
Tivoli Management Suite
Dell OpenManage
Compaq Insight Manager Management Station
Intel LANDesk Client Manager
Requirements" earlier in this chapter.
Installing the 3Com DMI Agent 91