Remote Wake-Up; Remote Wake-Up Cable; Remote Wake-Up Requirements - 3Com 3C905C-TX-M User Manual

Remote Wake-Up

Remote Wake-Up is the ability to remotely power-on a PC
for after-hours administration.
Remote Wake-Up support is enabled by connecting a
Remote Wake-Up cable from the NIC's Remote Wake-Up
(RWU) connector to a 3-pin Remote Wake-Up connector
on the PC motherboard. See
Wake-Up Cable"
For 3C905C-TX-M NICs, if your PC is compliant with
PCI 2.2, Remote Wake-Up is automatically enabled
through the PCI bus. The Remote Wake-Up cable is not
required. (See your PC documentation if you are unsure
whether your PC is compliant with PCI 2.2.)

Remote Wake-Up Cable

A Remote Wake-Up cable is shipped with each NIC that
supports this feature.
To order additional Remote Wake-Up cables, contact 3Com:

Remote Wake-Up Requirements

The following NICs support Remote Wake-Up:
Your PC or server must have a management application
that supports Remote Wake-Up. In addition, the following
items ar required to use Remote Wake-Up.
in
Toll-free number for the United States and Canada:
1-877-226-4604
Toll number for international calls:
1-510-226-4604
3C905C-TX-M
3C905B-TX
3C905B-TX-M
3C905B-COMBO
3C905B-FX
3C900B-FL
Remote Wake-Up
"Connecting the Remote
Chapter 2 for instructions.
17