St Port - 3Com 3C905C-TX-M User Manual

34 C
HAPTER

ST Port

The ST port on the 3C900B-FL NIC provides a 10 Mbps
fiber-based connection only.
The following table shows the cable requirements and
maximum network cable lengths for the ST port.
Port
ST
To connect the ST port:
1 Remove the protective covers from the NIC's
ST connector.
2 Connect the network cable to the ST connector on
the NIC.
The cable that you use for the 3C900B-FL NIC consists of
two individual cables. You can insert either cable into the
transmit (10) and receive (RX) connectors on the NIC.
2: I C
NSTALLING AND
Cable Required
Short-wavelength
fiber-optic (850 nm):
50 µ/125 µ
multimode fiber
62.5 µ/125 µ
multimode fiber
1 0
R X
K
1 0 L N
A C T
NIC
ONNECTING THE
Maximum Network
Cable Length
Full-duplex: 2,000 m (6,560 ft )
Half-duplex: 412 m (1,351 ft)
Full-duplex: 2,000 m (6,560 ft )
Half-duplex: 412 m (1,351 ft)