Windows Nt 4.0 - 3Com 3C905C-TX-M User Manual

Windows NT 4.0

To install the network driver:
1 Turn on the power to the PC.
2 Double-click the My Computer icon, then the
Control Panel icon, and then the Network icon.
The Network window appears.
3 Click the Adapters tab.
If networking has not been installed on your PC before,
Windows NT asks you if you want to install networking. Click
Yes. See the WINNT.TXT file located on the EtherCD or your
Windows NT documentation for instructions.
4 Click Add.
The Select Network Adapter dialog box appears.
5 Click Have Disk.
The Insert Disk dialog box appears.
6 Insert the EtherCD in the CD-ROM drive.
7 Make sure that the letter name of the CD-ROM drive
(for example, d:\ appears in the entry box, and then
click OK.
The Select OEM Option dialog box appears.
8 Make sure that the 3Com EtherLink PCI NIC is
selected, and then click OK.
The Adapters tab of the Network screen appears.
9 Click Close.
If the Microsoft TCP/IP Properties screen appears, enter
the requested information for your network environment.
Refer to your system administrator or the Windows NT
documentation for assistance.
If the Microsoft TCP/IP Properties screen does not appear,
the installation is complete.
10 Click Yes to restart the PC.
The network driver installation is complete. Go to
"Verifying Successful
to confirm that the NIC is properly installed.
Installing the Network Driver Using the EtherCD
Installation" later in this chapter
41