Installing The Netware Server Driver; Obtaining Netware Loadable Modules - 3Com 3C905C-TX-M User Manual

Installing the NetWare Server Driver

This section describes how to install the NetWare driver on
a Novell server running NetWare 3.x, 4.x, or 5.x.
The EtherLink PCI NICs do not support NetWare 3.xx or
4.xx servers that are not updated to the latest driver pack.
The \NWSERVER\NW3.x directory contains the network
driver file (3C90X.LAN) to be used for servers running
NetWare 3.x.
The \NWSERVER directory contains the network driver file
(3C90X.LAN) to be used for servers running NetWare 4.x
or 5.x.
Additional files (NetWare Loadable Modules [NLMs])
that are required for servers running NetWare are on
the EtherCD in the \NWSERVER directory, or they can
be obtained from Novell.

Obtaining NetWare Loadable Modules

You can obtain current NLMs for the NetWare servers listed
in the table below from the Novell World Wide Web site:
http://www.support.novell.com
NetWare Server
NetWare 3.12
NetWare 4.10, 4.11
NetWare 5.x
Installing the NetWare Server Driver
NLM Name
ETHERTSM.NLM
NBI31.NLM
MSM31X.NLM
ETHERTSM.NLM
NBI.NLM
MSM.NLM
ETHERTSM.NLM
MSM.NLM
51