3Com 3C905C-TX-M User Manual page 24

Before you start, make sure that you have two blank,
formatted diskettes. Label the diskettes EtherDisk 1
and EtherDisk 2.
EtherDisk 1 contains:
NDIS 3/4/5 drivers
NetWare client and server drivers
Windows for Workgroup drivers
NIC preinstallation program
README.TXT file
EtherDisk 2 contains:
NDIS 2 driver
PACKET driver
Help text files
DOS utilities
To create installation diskettes from the EtherCD:
1 Turn on the power to the PC and start Windows.
2 Insert the EtherCD in the CD-ROM drive.
The EtherCD Welcome screen appears.
If the EtherCD Welcome screen does not appear, enter
the following command from the Run option of the
Windows Start menu:
d:\installs\setup.exe
where d:\ represents the letter name of the CD-ROM drive.
3 Click NIC Software.
4 Click NIC Drivers and Diagnostics.
5 Click Installation Utilities.
6 Click Create Installation Diskettes.
The EtherCD Diskette Creation Utility Welcome
screen appears.
7 Click Next.
8 Insert the blank, formatted diskette labeled
EtherDisk 1 in the PC, and then click Next.
Files are copied.
Installing From Diskette 23