I Dynamic Access Lan A; Nstalling The; Overview; Client Pc Requirements - 3Com 3C905C-TX-M User Manual

B

Overview

This chapter explains how to install and configure the
DynamicAccess LAN agent on a PC running Windows 95,
Windows 98, or Windows NT.
For an overview of the DynamicAccess LAN agent, see
"DynamicAccess LAN
information on using, configuring, and troubleshooting
the DynamicAccess LAN agent, access the DynamicAccess
Technology User Guide on the EtherCD. You can also
download it from:
http://www.3com.com/dynamicaccess

Client PC Requirements

The DynamicAccess LAN agent can be installed on a PC
running Windows 95, Windows 98, Windows NT 4.0,
or Windows NT 3.51.
CAUTION: If you plan to install the DynamicAccess LAN
agent on a multiprocessor PC running Windows NT 4.0,
Service Pack 4, you must first download and install the
appropriate Microsoft patch available at:.
http://www.3com.com/dynamicaccess/hotfixes
Failure to install the patch will result in system failure.
The following table lists the minimum client requirements
and recommended Microsoft Service Packs (if any) for the
version of the DynamicAccess LAN agent that is included
on the EtherCD.
I

NSTALLING THE

D
YNAMIC
LAN A
GENT
Access
Agent" in Chapter 1. For detailed