Netware 3.12; Importing The Server Driver - 3Com 3C905C-TX-M User Manual

52 C
HAPTER

NetWare 3.12

To install the driver in a NetWare 3.12 server:
1 Copy the MSM31X.NLM, ETHERTSM.NLM, and
NBI31.NLM files from the EtherCD to the directory on
your hard drive where other NLM files are located.
2 Copy the LAN driver file (3C90X.LAN) from the
EtherCD to the same directory.
3 Add the following two lines to the AUTOEXEC.NCF file:
load C:\NWSERVER\3C90X.LAN slot=<slot>
NAME=<name> FRAME=<frametype>
bind ipx to <name> net=<number>
4 Save and exit the file, and then reboot the server.
NetWare 4.x
There are two ways to install the NetWare 4.x driver:
Make sure that you have the latest NetWare Support Pack
installed. that changes the LOADER.EXE file and provides
the NBI.NLM, MSM.NLM, and ETHERTSM.NLM files.
3Com has provided the latest *.NLM files (at time of
testing) on the EtherCD in the \NWSERVER directory.

Importing the Server Driver

To import the server driver into a NetWare 4.x server:
1 Install the NetWare server software.
2 Insert the EtherCD in the CD-ROM when the NIC
selection menu appears.
3 Press [Insert].
This key tells the server installation program that you want
to add a driver externally.
4 Press [F3].
This key tells the server installation program that you want
to change the path.
4: I N
NSTALLING THE
Import the driver when installing the NetWare
server software.
Copy the driver to the server's hard disk, and then load
the driver manually.
W C
ET ARE LIENT AND
S D
ERVER RIVERS