Connecting To The Network; Remote Wake-Up - 3Com 3C905-TX Installation Manual

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide

Connecting to the Network

7 Secure the card by replacing the slot cover screw or the retaining
bracket and its screw, as appropriate.
8 Replace the cover. Reconnect the power cord and any connection to
a telecommunications network.
Connecting to the Network
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100
Mbits/s operation.
RJ-45 UTP
Connector

Remote Wake-Up

The network interface card is able to wake the PC from a sleep state if
it receives a special sequence (known as a Magic Packet
network.
8 English
TM ) from the