Table of Contents
Advertisement
EventDOT 15 Q4
Control Modes
The EventDOT 15 Q4 can be controlled manually, via infrared (IR) remote control, and via Wi-Fi. The table
below shows the different control options and the available features for each control mode.
Number of devices
Auto mode
Built-in programs
Static colors
Custom colors
(Dimming mode)
Custom chases
Strobe
Speed
Configuration
Manual Control
The device can be controlled via the manual control button (10).
Functions of the Manual Control Button
The manual control button (10) has the following functions:
Switching on the Device
Press and hold down the button for 3 seconds to switch on the
device. The battery indicator LEDs (01) will light up in this sequence:
LED 4, LED 3, LED 2, LED 1.
Release the button after all 4 battery indicator LEDs (01) are on.
Note: If you release the button before all 4 LEDs are on, the device
will remain switched off.
Switching off the Device
Press and hold down the button for 5 seconds to switch off the
device. The battery indicator LEDs (01) will light up in this sequence:
LED 1, LED 2, LED 3, LED 4.
Release the button after all 4 battery indicator LEDs (01) are on.
Note: If you release the button before all 4 LEDs are on, the device
will remain switched on.
Product code: 44011
Manual
IR Remote
1
> 1
Yes
Yes
Yes
Yes
Yes (15)
Yes (15)
No
Yes
No
No
No
Yes
No
Yes
No
No
Web interface
1
Yes
Yes
Yes (15)
Yes
No
Yes
Yes
Yes
20
Wi-Fi
DMX via Art-
Mobile App
Net (sACN)
> 1
> 1
Yes
No
Yes
Yes
Yes (15)
Yes (33)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes (limited)
No
Advertisement
Table of Contents
