Control Via The Web Interface; Wi-Fi Setup - SHOWTEC EventDOT 15 Q4 User Manual

EventDOT 15 Q4

Control via the Web Interface

You can control the device and configure its settings via the web interface. You can access the web
interface from the Internet browser on your computer/laptop.
To access the web interface, follow the steps bellow:
Connect the device to the computer/laptop. See 5.2.1. Wi-Fi Connection of a Single Device on
page 16 for more information.
Open the Internet browser on your computer/laptop.
Enter the IP address of the device into the address bar of the browser: 192.168.4.1.
Press Enter on the keyboard of the computer/laptop to open the web interface in the browser.
Note:
If the device is connected via the router to the computer/laptop, the IP address is assigned by the
network.
The web interface offers the following configuration sections:
●

Wi-Fi Setup

● Setup Devices
● Art-Net Configuration
● sACN Configuration
There are two buttons at the bottom right corner in each section of the web interface: Load and Save.
● Click the Load button to load the current active settings in the respective section.
● Click the Save button to save the changes you made in the respective section.
Wi-Fi Setup
In this section you can connect the device to the router:
Enter the SSID name of the router in the SSID field.
Enter the password of the router in the Password field.
Click Save to save the changes and complete the Wi-Fi setup. A confirmation dialog box will pop up
to confirm that the changes are saved.
Click Ok to close the pop-up confirmation box.
Product code: 44011
26