Resetting The Logger; Hibernating A Trel30-16 - LogTag Recorders TREL30-16 Product User Manual

Resetting the Logger

Resetting the Logger
You can reset a TREL30-16 back to its original
started again.
When performing this procedure all recordings and statistics stored in the logger
are irrevocably deleted and cannot be recovered. Please ensure your data has been
saved!
All settings in the logger are retained.
For this process to work, the logger must be
.
STOPPED
Press and hold the
symbol will flash.
READY
When the symbol remains permanently on,
READY
release the button within 2 seconds. The logger is
now ready to be started again.
If the button is released while
symbol disappears, the display shows
This means, the data from the previous trip is still accessible.
The ability to reset a logger is enabled or disabled in the
configuring the TREL30-16 via LogTag

Hibernating a TREL30-16

When hibernated, the logger's power consumption is near zero and the life of the battery
is greatly extended.
This is useful for conserving battery life when the logger is not used for extended periods.
TREL30-16 loggers are placed into Hibernation using LogTag
Hibernate on the LogTag menu.
The display shows SLP for a few seconds, before turning itself off.
TREL30-16 User Guide
button. The
START
/CLEAR/STOP
STOPPED
®
state. Once reset, recording can be
READY
is still blinking, or you wait until the
again, and the logger remains stopped.
STOPPED
Advanced Settings
Analyzer.
READY
tab when
®
Analyzer by clicking
37