Real-Time Clock - LogTag Recorders UTRED30-16 Product User Manual

Real-Time Clock

Real-Time Clock
The time shown on the recording display is linked to the logger's internal real-time clock.
A day change occurs when the display time rolls through midnight (i.e. 00:00), which
triggers the statistical data to be finalized for the day, and a new day to be started when
the next reading is taken.
Each time the logger is configured with LogTag
the PC's current local time (or timezone).
Note that the logger's internal real time clock value is only updated when the
recorder is configured with LogTag
becoming discontinuous, which would be the case if the real time clock were to be
changed together with the display clock.
®
LogTag Analyzer can display the logged readings in a number of different time zones,
regardless of where it was configured. Please note, however, that the PDF's time zone has
to be set at configuration and cannot be changed after the logger has been downloaded.
UTRED30-16 User Guide
®
Analyzer the display clock value is set to
®
Analyzer. This prevents the data logging
28