Adjusting The Spring Arm Tension - StarTech.com ARMSLIMDUAL2USB3 User Manual

Adjusting the Spring Arm Tension

Using your hand push downward on the Upper Arm holding
1.
it in place.
Using the 6 mm Hex Key, rotate the Adjustment Screw
2.
located at the base of the Upper Arm, clockwise (decreasing
tension) or counter clockwise (increasing tension).
The Upper Arm (spring arm) should only be placed in a
3.
horizontal position.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Spring Arm Tension
47