Table of Contents
Advertisement
Using the 4 mm Hex Key tighten the Countersunk Hex
3.
Screws, being careful not to over-tighten.
Remove the backing from the Adhesive Foam Pad.
4.
Carefully apply the Adhesive Foam Pad to the bottom side
5.
of the upper portion of the Upper C-Clamp.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Button Head Screws
Removing the Adhesive Backing
16
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMSLIMDUAL2USB3 and is the answer not in the manual?