Adjusting The Monitor Mount; Adjusting The Spring Arm Tension - StarTech.com ARMSLIMDUOS User Manual

Note: The VESA Clip on the VESA Holder should be upright
before mounting the Monitor.
While holding the VESA Clip and supporting the weight of
10.
the Monitor, align the Mounting Plate of the VESA Mount
with the VESA Holder on the Spring Arm.
Slide the Mounting Plate on the VESA Mount down into
11.
the VESA Holder until the Mounting Plate is sitting on
the bottom of the VESA Holder and the VESA Clip, once
released will hold the top of the Mounting Plate in place.
While holding the Monitor in place, release the VESA Clip,
12.
securing the Monitor in place.
Repeat steps 9 - 12 to mount the second Monitor.
13.

Adjusting the Monitor Mount

Adjusting the Spring Arm Tension

Using your hand push downward on the Spring Arm and
1.
hold it in place.
The Spring Arm should only be placed in a horizontal
2.
position.
Use the 5 mm Hex Key to rotate the Adjustment
3.
Screw located at the base of the Spring Arm, clockwise
(decreasing tension) or counter clockwise (increasing
tension).
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
20