Adding Phone Service - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation

Adding Phone Service

You can use traditional phone service with Response Point for inbound and outbound calls. It uses hard-wired lines
to connect your business to the worldwide phone system. Your office may have one or more landline phone lines.
To set up phone service, you need a phone line adapter, which translates the analog signal coming from the landline
phone line to Response Point. Likewise, it takes the outgoing digital signals from the phone system and translates
them to analog signals that can be sent over landlines. To place outbound calls, you must first dial 9 and then the
phone number.
To add phone service:
1. Click the Phone System button.
2. In the Tasks panel, under Phone Service, click Add Phone Service.
3. Complete the steps of the Configure Phone Service Wizard, and click Finish.
To edit an existing line of service:
1. Click the Phone System button.
2. In the Tasks panel, under Phone Service, click Edit Phone Service and select the adapter for the service that you
want to edit.
3. Complete the steps of the Configure Phone Service Wizard, and click Finish.
D-Link DVX-000MS User Manual