Download  Print this page
   

Advertisement

Advertisement

   Related Manuals for D-Link VoiceCenter DVG-3104MS

   Summary of Contents for D-Link VoiceCenter DVG-3104MS

  • Page 2: System Requirements

    Note: Using a power supply with a different voltage rating than the one included with the DVG-3104MS will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. D-Link DVG-3104MS Quick Install Guide...
  • Page 3: Hardware Overview

    Power Receptor LAN Port Receptor for the supplied Used to connect the DVG-3104MS Power Adapter. to the Local Area Network. PSTN Lines Used to connect phone cables to the PSTN lines. D-Link DVG-3104MS Quick Install Guide...
  • Page 4 Local Area an Off/Solid On light indicates an Network. This LED blinks during error or the device is not ready. data transmission. VoIP LED A solid Green light indicates the SIP is registered. D-Link DVG-3104MS Quick Install Guide...
  • Page 5 Connect the phone cable to an available PSTN (FXO) Port on the back of the gateway and connect the other end to a phone jack. When you have made all the connections to the gateway, it should look like the diagram below: D-Link DVG-3104MS Quick Install Guide...
  • Page 6 In the Tasks panel, under Phone Service, click Add Phone Service to launch the Configure Phone Service Wizard. Select the check box confirming the gateway is connected and plugged in. Click Next to continue. D-Link DVG-3104MS Quick Install Guide...
  • Page 7 Select the D-Link DVG-3104MS Gateway you just connected and click Next to continue. Select the This Port Is Active check box. Enter in a phone number or name associated with this line in the Description box. Click Next to continue.
  • Page 8: Technical Support

    Version 1.2 September 24, 2008 ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and the VoiceCenter logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Microsoft Response Point is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Comments to this Manuals

Symbols: 0
Latest comments: