Download Print this page

Advertisement

Advertisement

   Related Manuals for D-Link DPH-125MS

   Summary of Contents for D-Link DPH-125MS

  • Page 2: System Requirements

    Power Adapter Note: Using a power supply with a different voltage rating than the one included with the DPH-125MS will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.

  • Page 3: Hardware Overview

    Hardware Overview Front LCD Display 3-Way Conference LED Indicator Voice Messages Response Point Button Transfer Hold Mute/Function Alphanumeric Keypad Speaker Phone UP/Down Arrow Keys Right-Arrow / OK Left-Arrow / Cancel Menu Call History D-Link DPH-15MS Quick Install Guide...

  • Page 4

    Used to connect the IP Phone through Ethernet cable to your LAN Port Used to connect the IP Phone through Ethernet cable to your Local Area Network. Power Receptor Receptor for the supplied power adapter. D-Link DPH-15MS Quick Install Guide...

  • Page 5

    AC input on the phone. The Power LEDs will light up to indicate proper connection. When you have connected the IP Phone to your network it should look like the diagram below. D-Link DPH-15MS Quick Install Guide...

  • Page 6

    Configure the DPH-125MS IP Phone Note: Microsoft Response Point Administrator only operates with ® ™ Windows XP SP2 or Windows Vista ® ™ Open Microsoft Response Point Administrator to configure the IP Phone using the Configure Phone Wizard. Use the following steps...

  • Page 7

    Select the D-Link DPH-125MS IP Phone you just connected and click Next to continue. For this step, you will add a new user and assign that user to the phone you just configured. Click Assign User to open the New User screen.

  • Page 8

    OK to continue. You have now assigned the person’s name to Line 1 with the extension number you specified. You can assign up to 3 additional users to this phone or click Next to continue. D-Link DPH-15MS Quick Install Guide...

  • Page 9

    The owner and phone name have automatically been created for you. Click Finish to continue. The IP Phone has been successfully added to the phone system. Click Close to exit the configuration wizard. D-Link DPH-15MS Quick Install Guide...

  • Page 10

    ® ™ computer where a DPH-125MS IP Phone is located and record the last 4 digits of the MAC address. You can find the MAC address by pressing the MENU key and then press the UP Arrow key three times.

  • Page 11

    MAC ADDRESS USER NAME D-Link DPH-15MS Quick Install Guide...

  • Page 12: Technical Support

    Version 1.2 September 24, 2008 ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and the VoiceCenter logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Microsoft Response Point is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Comments to this Manuals

Symbols: 0
Latest comments: