Parking And Retrieving A Call - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation

Parking and Retrieving a Call

Parking a call is like holding a call, except that it can be picked up on any phone in your office. For example, you may
take a call at your desk, park it, and then retrieve it at a phone in the warehouse, the back office, or at another desk.
Response Point supports nine parking spaces for calls.
™
Important If you place a call internally to another employee and that employee parks the call, and then you put the call
on hold, the connection will be terminated when the employee you called retrieves the call.
To park and retrieve a call:
1. Press the Response Point button to park the call. The Automated Receptionist will tell you the space number in
which the call is parked.
2. From a phone, press the Response Point button and say "Retrieve," and then say the call number. For example,
say "Retrieve call 1."
Tip: If you're retrieving a call from the same phone where you parked it and only one call is parked, you can simply
say "Retrieve my call."
D-Link DVX-000MS User Manual 1